ProductDescription
CarPro CQuartzUK Edition (30ml)
Coat your car with the glossiest and hardest coatingavailable on the open market!
The incredible 70% SiO2 with 99.9%purity formula is based on the same technology as the original Cquartzwith some interesting tweaks. Other ceramic coatings have far less SiO2(Quartz) in the product however CQUK has 70% SiO2 with 99.9%purity. This is the first ever coating which has this concentration! Thepure quality ensures the most transparent glass coat film over the surface,which guarantees long lasting coating with extreme strength andwater-repellency. Once the liquid meets the open air it cures and forms aceramic quartz hard coating on the surface with extreme hydrophobicity andgloss beyond even that of CQuartz.
KitIncludes:
(1) 30ml bottle of CQuartz UK Edition (Approximately 3-4 average size vehicles)
(1) CarPro Foam Applicator Block
(4) 4" MF Suede applicators
Features:
Protection and gloss comparable to the bestprofesssional cotings available but easy to use for all detailers
CQUK has 70% SiO2 with 99.9% purity!!!
Extremely deep, rich Gloss
Easy maintenace with "self cleaning"properties (Stays cleaner than waxes, sealants and other coatings)
Resistance to Wash Induced Marring
Average thickness of Cquartz UK layer is between 1µm ~2 µm per layer
Minor swirl filling abilities
Repels water, oils, dirt, and contaminants
Protection from UV rays
Resists stains, bird droppings, water spots,and traffic film
Resists extremely high temperatures. Feel freeto coat engine components, etc that correspond to the materials shown.
Ultra hard CQuartz UK contains ceramic nanoparticles found within glass, the result is a highly reflective, transparentlayer.
Can also be layered: Allow 1 hour minimum waittime after buffing to allow cure before applying another coat.
Surfacesyou can protect with CQuartz:
Paint
Wheels
Metals
Specifications:
Recommended working temperatures: 41F to 90F
Durability: Approximately 2 years or more
Water contact angle: 110°
Light swirl filling properties
Thick layer: 1~2 Micron each
PreparationTips:
If contamination exists it is recommended that youIronX and clay your vehicle before polishing.
To gain the most from Cquartz it is recommended thatyour vehicle have all painted surfaces clean and polished to a high standard.
Use CarPro Reflect to achieve anincredible high gloss finish!
Use CarPro Eraser to remove all oilsleftover from polishing which would hamper the penetration of Cquartz andseriously compromise durability.
Directions:
Wrap a mf Suede (included) around the applicatorblock (also included)
Shake CQuartz UK well and apply to the applicator
Spread across surface and buff in over entiresection until it begins to disappear and flashes
Using a 16" Suede mf towel, wipe off residue toensure flat streak-free finish
*Note: If applying in cold weather below65-70F, allow to sit 2-5 minutes before wiping off
Move to next section and repeat
Apply Reload 1 hour or more from the start of CQUKapplication
Tips:
Park vehicle in direct sun after application iscomplete.
Keep surface dry for at least one hour afterapplication
Wipe any water off the surface during the first 24hours after application
Avoid washing with any soaps for the first 7 days
Precautions:
Never allow highly alkaline (ph11+) chemicals suchas non-diluted all purpose cleaners to sit or dwell on the surface for extendedperiods. This may damage and cause the coating to lose its hydrophobicability.
Do not apply in direct sun or on hot surface
Do not re-use 4" Suede applicators
Do not re-use the towels you used to buff off withunless you immediately toss them in a bucket of APC after use to avoid glasscrystals forming on them
Wear hand protection (disposable gloves)
Avoid vapors and use suitable respiratory protection
