DLUX Long Life Trim Coat was engineered specifically for coating plastics as well as rubber and metal. It can be used on any wheel finish including clear coated, chrome, aluminum, and plastic however I personally recommend CQuartz for use on paint and clear coats. This coating is the pinnacle of Exterior Plastic protection and darkens the trim as well without leaving any slick greasy feel that washes off.
Contents:
- (1) Foam Block Applicator
- (1) CQUARTZ DLUX 30ml
Features:
- Made from quality high-grade organic silane. DLUX is a Silane-based glass coating, DLUX contains more than 50% pure silica!
- Restores faded trim
- Withstands temperatures of more than 800 degrees making it the perfect coating for your engine bay and exhaust tips
- Lays down a protective film which forms an extremely durable glass coating on top of any substrate it is applied to.
- Weave incorporated a totally different nano composition to bond hard to plastic surface and achieve a thick uniformed layer.
- Dlux offers a semi permanent chemical bonding to surface pores
- Very easy to apply with great UV protection, on all exterior substrates.
- Can be used on textured or smooth plastic
- DLUX also offers semi permanent protection of aluminum wheels & Plastic finished wheels.
- On wheels, DLUX will repel dirt and dust with ease & aid in the removal of brake dust.
- DLUX will leave a glossy finish and is entirely hydrophobic.
- Durability: 9-12 months
- Average use for 4 wheels and all plastic trim = 10ml.
Applications:
- Plastic Trim
- Rubber Trim
- Engine Bay
- Headlights, Fog lights, & Tail lights
- Wheels
- Tires
- Metal Trim
- Exhaust Tips
- Chrome
- Plastic Wheel Wells
Directions:
- Make sure the surface is cool and dry. (Do not apply to hot surfaces or in direct sun.)
- Scrub surface with an all-purpose cleaner and or water spot remover, rinse and agitate with microfiber towel completely clean, and allow to dry.
- Use ERASER to remove any residue left by the APC or oil film and wait until the cleaned area is completely dry.
- Wet the applicator with 5-6 drops of DLUX and spread evenly across the surface.
- On textured plastic simply apply even and walk away
- On smooth plastic let cure 5 minutes and lightly wipe to ensure even finish
- On rims (metal, chrome, clear coat, etc.) let cure 1 minute at 85 degrees F up to10 minutes at 50 degrees F and use a suede MF to wipe it off gently, in a circle motion until no marks left
- Allow the surface to cure for 1-3 hours without any moisture on its surface
- During the first 24 hours: On Non-Porous surfaces like wheel or metal do not allow water to dry on the surface in order to avoid water spots
- Precautions:
- During the initial 24 hours after application any water should be wiped off as a precaution to avoid water spots
- Avoid contact with skin and eyes
- Wear gloves
- Never allow highly alkaline (ph11+) chemicals to sit or dwell on the surface for extended periods. This may affect the coating.
- Do not use for other purposes
- Keep out of reach of children
- Keep away from heat
- Do not ingest
